Application: Mountain water measurement tunnel construction

Flow measurements for media containing solids with large measuring ranges, optionally extendable with sensors for the determination of further medium properties. Our engineers support you from the evaluation of the suitable measuring point to installation and commissioning. We also provide solutions for the transmission, recording and evaluation of the measured data.

Unser Angebot für den sorgenfreien Betrieb Ihres Trinkwassernetzes ist breit gefächert. Wenn Sie den Verdacht haben, dass irgendetwas im Netzsystem nicht mehr einwandfrei funktioniert, oder auch einfach eine generelle Überprüfung der Installationen wünschen, dann hat Scheidegger genau das richtige Angebot für Sie.
Verify measurement data through a check

Check flow measurement

We offer a wide range of services for the carefree operation of your drinking water network. If you suspect that something in the network system is no longer working properly, or simply want a general check of the installations, STEBATEC has just the right offer for you.
LDM partially filled waste water flow measurement
Highly Precise Ultrasonic transit-time difference flow measurement for wastewater, raw wastewater and rainwater

LDM partially filled Flow measurement

Highly precise flow value acquisition. The LDM is a calibrated measuring device for backflow-free flow measurement of waste water in open channels or free flowing lines. 10 flow velocity measuring sections distributed over the entire cross section provide most accurate flow values when the sensor is partially or fully filled. The level measurement is integrated in the device housing.
Portable flow measurement for wastewater and external water
Temporary use of the proven MID for full filling to collect high-precision measurement data.

Portable flow measurement with MID

Waste water and external water flow measurement Measurements are performed with a high-precision, portable MID flowmeter mechanically protected by a plastic layer, which is normally installed in existing shafts and ducts without structural modifications. A bypass cushion completely seals the channel cross section and guides the entire water quantity completely through the measuring system.
Stationary flow measurement for waste water quantity measurement
Special solutions for measuring wastewater, raw wastewater and rainwater under the most difficult conditions.

Stationary flow measurement for wastewater

When the impossible becomes possible. High flow velocities, steep gradients, tight spaces, large measuring range. The more difficult the measuring task, the more suitable is the stationary flow measurement, which can often be retrofitted in existing structures and shafts.
TF stationäre Durchflussmessung teilgefüllt für Abwasser und Regenwasser
Ultrasonic transit time difference measurement with dry weather gutter

TF Stationary flow measurement partially filled

The TF Stationary Flow Measurement is a calibrated measuring channel for backflow-free flow measurement of wastewater, raw wastewater and rainwater in open channels or open channels.
Non-intrusive ultrasonic flow measurement for closed and fully filled pipelines.

Clamp-on flow measurement

Flow measurement on the outer wall of the pipe. With a flowmeter with clamp-on transducers it is possible to measure the flow in pipes simply from the outside. The transducers are installed on the pipeline with little technical effort and without process interruption. Rotationally symmetric flow profiles can be measured with only one acoustic section; non-symmetric ones require the use of several sections.

Offers, solutions and services

On our overview page you can easily get to know our wide range of products and filter as you wish:

Overview offers

Topics

Search

Search

Industries

Wastewater treatment, sewage plant, sewerage system and external structures
Steam and hot water systems
District heating
Running water / watercourse regulation
Stormwater treatment
Drinking water supply
Hydropower plants

Field of application