IDM-based pneumatic outflow control

• The control flap is located immediately after the flow measurement, thus it reacts quickly to changes in discharge and can also maintain the programmed control value with the smallest deviation and delay time.
• For the comparison with a knife gate valve flow control, the 1 to 10 rule of thumb can be used: While a knife gate valve can move to 100 individual positions in stages, the pneumatic discharge control system, thanks to the infinitely variable pressure control, can achieve at least 1000 individual positions – which is the basis for the high control accuracy.

The control of the pneumatic discharge control contains a touch display with zoom and swipe function, as well as a data logger and a local small DCS for use with a web browser, which can be accessed in the local network or, if desired, from the Internet. In addition to the versatile interfaces, the small DCS or the web server can also be integrated and displayed in the customer’s distributed control system.

Included as standard with modem for using all mobile networks up to 4G/LTE, Fixnet Internet connection and VPN technology

• Signal outputs: 4-20 mA: instantaneous flow rate and set control value
• Digital (active/passive): Flow counter and 2x fault
• Signal inputs: 4-20 mA: set-point control value
• Digital (potential-free): OPEN (remote); CLOSED (remote); AUTOMATIC; MANUAL START CLEANING;
• Communication: RS485 (Modbus RTU/ASCII), RS232, Ethernet (Modbus TCP) connection via Internet/VPN.
• VPN connection for remote maintenance with STEBATEC (Internet connection with STEBAmobile possible)

Connection diagram on request.